Technical Specifications for Holding Time

Installation Layout

The installation is arranged in a formation of 8 × 12 porcelain tiles, each spaced 20cm apart.The total footprint of the work measures approximately:

5.8m (L) × 3.8m (W)

A minimum viewing circulation of 1.5m is maintained around the installation perimeter.

Tile & Plinth Construction

Each porcelain tile measures:

30cm²
approximately 800g

Tiles are mounted and dismounted using putty onto individual plinth stands.Plinth heights vary between:

10cm – 120cm

Each plinth consists of:

30cm² MDF base (9mm)
18mm dowel support
20cm MDF top

Projection & AV Setup

The installation uses:

2 ceiling-mounted short-throw projectors
1 additional standard projector

Projectors are suspended centrally at approximately 3m height.The two short-throw projectors illuminate the tiled formation, while the additional projector is directed toward a suspended canvas surface positioned beyond the installation.All projection is operated through:

PC system
MadMapper software
external monitor control

Audio & Concealed Technical AreaThe work includes:

2 powered speakers
concealed PC and AV system

The canvas is mounted approximately 60cm from the wall using wooden brackets, creating a concealed rear technical workspace.

Canvas 2m × 1.2m
Brackets project out 60cm from wall
Hidden Shelving x2 1.8m by 60cm deep

Audience CirculationAudience movement naturally forms a U-shaped pathway around the installation perimeter, encouraging slow navigation while maintaining distance from the concealed technical wall. At Generator projects, i made use of the peep hole, which connected my other elelemts in the first smaller gallery.

Page updated

Google Sites

Report abuse